Fire fighting hose pipe is mostly used by firefighters. The most regular method in high-rises, then, is to make use of a constructing's standpipe device.
Elevation decreases water pressure, so a major quantity of drive is needed at floor stage to allow for a powerful move at the aspect of the attack. To battle the blaze on the floor, a fire fighting pipe needs about one hundred fifty inches of water drive. To receive water from twenty flooring of a building, the force of water has to be more than 300 PSI to balance the outcomes of advancement. For evaluation's sake, the general water drive is between 40 PSI and 70 PSI. Fire fighting pipes connect the piping of the respiration zone near the engine exercise. Fire fighting pipe has steel couplings that screw into a location to join and would make the threading on these couplings at a lot of sizes.
RANGE OF HOSES | BURST PRESSURE | PROOF PRESSURE | WORKING PRESSURE | SPECIFICATION | PROPERTIES | |||||
---|---|---|---|---|---|---|---|---|---|---|
Kg / Cm2 | PSI | Kg / Cm2 | PSI | Kg / Cm2 | PSI | |||||
CONTROLLED PERCOLATING HOSE | 36 | 530 | 22 | 320 | 18 | 260 | IS
8423/1994 TAC Approved Bearing ISI Marked |
Cotton
Synthetic Fiber, Circularly Woven Jacketed Ultra Thin Lining Light, Flexible, Compact Flat Folding Abrasion / High Kink Resistance. |
||
SUPER SYNTHETIC HOSES | 38 | 550 | 22 | 320 | 18 | 260 | IS
636/88 Type A BSS 6391 Type - 1 |
100
% Polyester Flexible, Compact, Robust High Kink Resistance Resistant to Abrasion Ageing, Ozone, Heat, Seawater . |
||
RRL HOSE | 38 | 550 | 22 | 320 | 18 | 260 | IS
636/88 Type A BSS 6391 Type - 2 TAC Approved Bearing ISI Marked |
Cotton
Synthetic Fiber, Circularly Woven Jacketed Rubberised Fabric Reinforced Rubber Lined (RRL) Flexible, Compact Flat Folding Abrasion Resistance. |
||
RRL EXTOCOAT HOSES | 38 | 550 | 22 | 320 | 18 | 260 | IS
636/88 Type A BSS 6391 Type - 2 TAC Approved Bearing ISI Marked |
100
% Synthetic Yarn, Circularly Woven Jacketed Rubberised Fabric Reinforced Rubber Lined (RRL) Flexible, Compact Flat Folding High Abrasion Resistance. |
||
SIZES AVAILABLE (in MM) |
38 | 50 | 63 | 70 | 75 | 100 | 150 |